Kopr EXT FF 1.0 Tool Joint & Drill Collar Compound

KOPR EXT FF 1.0 is a modification of EXTREME®. It's designed with a lower coefficient of friction to be used where rig tong and/or iron roughneck units lack the torque capacity to reach the optimum engagement of higher torque connections. This new formula still offers the additional advantage of superior adhesion, improved EP and antiwear properties, resistance to water wash-off, and superior rust and corrosion protection in the presence of invert or high-pH muds Kopr EXT FF 1.0 can be used for up to 6 months connection storage. The solids package is formulated to prevent wear and galling under compressive forces. As stress levels rise above 50% of yield, the friction factor increases, limiting down-hole makeup. Full hydraulic joint efficiency is maintained allowing joint shoulder faces to mate completely without standoff or deformation. __________________________________________________________ KOPR EXT FF 1.0 ARCTIC Can be used for up to 6 months connection storage and in lower arctic temperatures.

Beneficios

• Highly resistant to drilling muds
• Contains no lead or zinc
• Extreme pressure additives provide additional protection against seizing and galling
• Complex grease base provides superior rust and corrosion protection
• Sticks to wet joints
• Brushable and stable over a wide temperature range
• Consistent rig floor makeup

Especificaciones

Materiales Base

Complex Soap / Petroleum

Fricción / Factor de Tuerca

Friction Factor, *1.0 (Relative to API RP 5A3 Annex I)

Certificaciones

This thread compound conforms with API RP 5A3 for use with rotary shouldered connections.

Rango de Servicio

0°F to 450°F (-18°C to 232°C) · (ARCTIC) -40°F to 450°F (-40°C to 232°C)